How to Replace a UPVC Door Replacement Lock
If the lock on your door is jammed or doesn't function as it should, you might need to replace it. The process might seem complicated but it's actually quite simple and doesn't require the services of a locksmith.
A few basic tools, a bit of patience and plenty of attention should do the trick. Here's how you do it:
Take a measurement of the door
It's possible to replace your uPVC doors if you're experiencing difficulty locking them or they won't shut. Whether you've recently moved house or a tenant left without returning the keys, or your multipoint gear box is showing signs of wear and tear, it's easy to change the barrel on your lock to one that is new and provides an additional layer of security.
Before you purchase a new lock, you'll need make sure you have key measurements to ensure the new lock fits properly and won't affect your home security. The backset is the most crucial. This is the distance from the centre of the keyhole bore hole to the edge of the door. It's usually around 2 3/8 or 2 3/4 inches. You can measure the length using measuring tape, and write the measurements.
You should also know what the thickness of the faceplate is. door lock repairs billericay repairmywindowsanddoors is the thickness of the piece that covers the mechanism of the lock. If you can, get a replacement lock made by the same manufacturer as they will be manufactured to the same measurements. If you can't find the name of the manufacturer or the mark, simply determine the width of the current cylinder. You can also check this by placing a pencil over the keyhole and measuring from the bottom of the lock to the centre of the pencil mark on the opposite side of the cylinder.
Once you have the dimensions you need, you can begin removing the old cylinder. Start by loosening the screw that holds the handle with a Phillips-head driver, then loosen the screws that connect the interior and exterior handles to each other. Once these have been removed, you can then remove the barrel screw on the handle's exterior and remove the cylinder.
If the cylinder gets stuck in the lock you can use WD-40, or another oil or lubricant. It is important to not force it out. The forceful turning of the cylinder can damage the lock's internal gearbox. You may also want to consider upgrading to a lock with anti-snap and anti-bump protection, which is more secure against attacks by thieves.
Source the Lock
When buying the latest door lock, you must take into consideration the following aspects. Make sure you've got the right size of cylinder that will fit your door and ensure you're purchasing from a reputable manufacturer to ensure a perfect fit and quality. You'll need some basic tools for the job including an screwdriver as well as mallets made of rubber.
There are a variety of signs that your upvc lock is wearing out and must be replaced. Common problems are visible damage to the lock or a handle that's loose and not fitting correctly. If the lock is jamming, or isn't locking at all, it's time for a replacement.
Once you've selected the perfect lock, it's important to install it correctly to ensure that it works properly and locks securely. Follow the manufacturer's instructions when installing the multipoint lock mechanism inside the upvc panel. Install the correct faceplates, handles and other parts. Once everything is in place check the mechanism by locking and unlocking the door from both inside and outside. If all looks good you're ready to celebrate your achievement.
The process of replacing a door lock made of upvc may sound intimidating however, it's an easy DIY project and can be done without the assistance of a locksmith. By recognizing the signs that your lock is ready for replacement and having all the necessary tools available, it can be a relatively simple process.
Remember that a upvc lock will benefit from lubrication as with any other moving part. A few sprays of silicone or graphite powder lubricant can help to prolong their lifespan by ensuring they are free of excess friction that can wear them down prematurely. Regular cleaning using a damp cloth and WD-40 can help in keeping your door locks in good condition.
Remove the Cylinder
If you're experiencing issues with your upvc doors It could be time to change the barrel of your lock. This is a simple DIY project that can be done in just several minutes. It's also an effective method of maintaining your home security. This process requires that you identify the brand of the lock and then search for an appropriate replacement.
A broken door lock can be a major inconvenience and can be a security risk. It's not uncommon for the locks on uPVC doors to experience issues, and it's important to maintain regular maintenance. In fact, experts suggest that you change your lock every seven years. If your lock is suffering from severe damage or you're not satisfied with its performance, it's certainly worth seeking out the help of an expert.
For uPVC, a simple pin system called a euro cylinder will be employed in most instances. They are easy to use and don't fail however they can be vulnerable to attack. In the end it's a good idea to replace your lock cylinder with one that is more modern and has anti-snap and anti-bump protection to prevent burglary.
The first step to replace your uPVC lock is to remove the handle and expose the old cylinder. It can be a challenge because there are often screws concealed beneath the handles. Make sure you have your screwdriver at hand. You'll need to gently pull and wiggle the cylindrical until it is loose. When it is loose, you can take it out of its socket.
When you have found an appropriate replacement you can simply screw it in and reverse the removal process. Do not overtighten the lock as this can cause the cylinder in the door to become stuck and stop functioning as it should. Test the uPVC replacement lock by opening and closing it both from both sides. You should now be able to lock and unlock the door using your key. If not, make sure that the screws are tight and try again.
Install the Lock
Do some research to be sure the lock you choose is the right one for your door. You'll need to be aware of the faceplate and backset measurements - which is the distance from the edge of the door to the center of the handle or cylinder as well as the type of lock you choose to ensure that the lock is properly fitted without compromising security.
Once you've done that, it's time to start installing the new lock. It is recommended to open the door with a prop, or lock it so that it doesn't close during the installation process. The first step is to loosen the screws that hold the handle in place by using a Phillips-head screwdriver. After the screws are removed and the handle is free of screws, you can slide the inside handle and the outside handle apart.
It is now possible to remove the old cylinder by unscrewing it. Once you've removed your cylinder then you'll be able to install your replacement lock, ensuring you follow the directions for the particular model you have. Once the lock is in place, you can test the new lock by opening and closing the door from the inside and outside, locking and unlocking it from the inside, and then retesting it.
There are many reasons you may need to change the locks on your uPVC door. It might be that you've recently moved into the property and don't have a key, or the previous tenant didn't return the key, or you might just prefer an extra secure lock. Whatever the reason changing the lock's cylinder is simple and should take just five minutes.
Whether you have a multipoint lock, or a single-point lock, they all operate with the same basic mechanism. This means that they could be prone to problems occasionally that could result in them not being able to close or getting stuck. These problems can be caused by weather conditions or wear and tear or just everyday use. The majority of these issues are easily corrected with a little maintenance or hiring locksmiths.